- B-W5H4.5L35-N48M Neodymium Magnet, 35x5x4.5mm Block Magnet
- B25x5x1mm Neodymium Magnet, 25 x 5 x 1mm Block Magnet
- B50x12x2mm Neodymium Magnet, 50 x 12 x 2mm Block Magnet
- RX04X0 Neodymium Magnets, 1 inch od x 1/4 inch id x 1 inch thick
- B443 Neodymium Magnets, 1/4 inch x 1/4 inch x 3/16 inch thick
- D9X0 Neodymium Magnets, 9/16 inch dia. x 1 inch thick
- D-D6H2-N45-DIA Neodymium Magnet, 6x2mm Disc Magnet
- MM-C-25 Metric Mounting Magnets
- STC Neodymium Stars Magnets
- BEEC Neodymium Magnets, 7/8 inch x 7/8 inch x 3/4 inch thick
- D10x1mm Neodymium Magnet, 10 x 1mm Disc Magnet
- BX0X09 Neodymium Magnets, 1 inch x 1 inch x 9/16 inch thick
- C-D3H5-N45 Neodymium Magnet, 3x5mm Cylinder Magnet
- D-D18H15-N48 Neodymium Magnet, 18x15mm Disc Magnet
- B25x15x5mm Neodymium Magnet, 25 x 15 x 5mm Block Magnet
- D61-N52 Neodymium Magnets, 3/8 inch dia. x 1/16 inch thick
1/2 Inch Cube Neodymium Magnets
1/2 inch cube neodymium magnets
- NdFeB, Grade N42
- Dimension: 1/2" x 1/2" x 1/2" thick
- Pull force: 18.71 lbs
- NdFeB, Grade N52
- Dimension: 1/2" x 1/2" x 1/2" thick
- Pull force: 23.16 lbs
Buy 1/2 inch neodymium cube magnets from https://www.albmagnets.com/? Free USA shipping option on every order? Is Express shipping available?
+/-0.005" manufacturers tolerance on any dimension
WARNING: This is a seriously powerful magnet and it is totally unsuitable for children.
The price breaks for this item are designed to allow our customers to purchase enough magnets to make a cube (of various sizes) out of cubes!
The ultimate executive desk toy - these keep fingers busy and can be used to hold things on magnetic noticeboards/whiteboards too.
Because of their strength, they are great for magnetic glass boards too.
To make a cube 2 magnets long x 2 magnets wide x 2 magnets wide you need 8 magnets
3x3x3 requires 27 magnets
1/2 Inch Neodymium Rare Earth Cube Magnets N42 (400-Pack)
ALB neodymium cube magnets: 1/2" Width x 1/2" Length x 1/2" Thick. Wholesale/volume discounts available.
Free US shipping $1000+.
1/2 Inch Neodymium Rare Earth Cube Magnets N42 (400 Pack)
Buy B888-N52 Neodymium Rare Earth Magnets 1/2 Inch Cube N52 with fast shipping and top-rated customer service.
Magnets are incredibly useful and fun, but they arent without their hazards.
Please read the below advice before handling magnets and remember, safety first!
DANGER OF BREAKING OR CHIPPING
Neodymium magnets are strong.
Place two magnets close to each other, even small ones, and they will attract, leap towards each other with great acceleration and then slam together.
This is the most common cause of broken magnets and it is possible that one or both magnets could chip or shatter.
Due to the force exerted by the magnets, it is possible that chips may fly off at high speed into someone's eye, therefore we advise that when handling more than one neodymium magnet that you wear eye protection.
Chips and broken magnets can also be quite sharp, so treat them as carefully as you would broken glass.
DANGER FOR CHILDREN
Children should be supervised at all times when handling or playing with magnets and small children likely to swallow them should be kept away from them at all times.
If more than one magnet is swallowed, they can attract each other through the walls of the intestines, get stuck, and pinch the digestive tract causing major swelling and even life-threatening injuries requiring surgery.
Always keep all neodymium magnets out of the reach of children.
CRUSHING, BLOOD BLISTERS, AND CUTS
When larger magnets are brought close enough together they can have a surprising amount of power.
Fingers are quickly caught between them which can cause blood blisters or cuts.
Wear gloves when handling larger magnets and always handle with care.
Larger magnets (30 cm3+) can crush fingers and break bones.
MAGNETICALLY SENSITIVE ITEMS
Neodymium magnets are ten times stronger than ordinary magnets.
Keep a safe distance (at least 20cm) between the magnets and all objects that can be damaged by magnetism.
Items such as mechanical watches, heart pacemakers, CRT monitors and televisions, credit cards, diskettes, and other magnetically stored media such as videotapes are all affected by powerful magnets.
There is a general lack of understanding regarding how magnets can affect heart pacemakers.
At albmagnets.com we sought advice from a specialist and the following information represents our best knowledge regarding how heart pacemakers are affected by magnets.
Lindsay Grant (BSc CEng FIET CSci FIPEM ARCP) is a Consultant Clinical Scientist and Head of the Clinical Engineering Department of Medical Physics & Bioengineering at the Royal United Hospital.
Lindsay kindly gave us this advice: The operation of heart pacemakers will be affected by the close proximity of a magnet.
Magnets can set a pacemaker working in a way that is not suitable for the pacemaker user and that might affect their health.
This change will stop when the magnet is removed.
She added: The background to this is that magnets are used to put pacemakers into a mode of working that does not respond to the patient's own heart rhythm.
We regularly use magnets in our pacemaker clinics to change the working of the pacemaker, to see how it is operating.
Each pacemaker manufacturer uses the 'magnet response' of a pacemaker in a different way, so it is impossible to be more precise than the above statement.
Some manufacturers have a response that makes the pacemaker pace the heart at 100 beats-per-minute or faster.
The pacemaker will not usually synchronize with the natural heartbeat when a magnet is applied.
Although in 20 years experience of putting magnets on pacemakers, I have never had a problem, it is theoretically possible to trigger a life-threatening heart rhythm by doing so.
albmagnets.com thank Lindsay for this clear and valuable advice.
SURFACE PLATING - WEARING AND CHIPPING
Our neodymium magnets are usually plated with a triple layer of protective plating - a layer of nickel, then a layer of copper, and then a final layer of nickel.
This plating can wear away in the course of normal use if it is sliding or impacting onto a hard surface such as steel.
If the coating is worn away, then the magnet will be exposed to corrosion and since the magnets contain a high percentage of iron, they will rust easily.
It is always better to use the magnet in a way that mechanically prevents it from ever touching the part that it is attracting.
A mechanical stop that holds the magnet 0.2mm away from the attracted part will ensure a magnet's life is extended.
CUTTING OR DRILLING NEODYMIUM MAGNETS
Neodymium magnets can be secured in place with adhesive or with countersunk screws.
Magnets are sintered and are therefore extremely hard and brittle.
You should never attempt to cut or drill into a magnet unless using diamond tooling and coolant as the dust can be highly flammable.
Our neodymium magnets are nickel-plated.
Nickel is a metal that can cause an allergic reaction in some people who are exposed to long-term contact with objects that release nickel.
In most cases, these allergic reactions are triggered by jewelry containing nickel.
As a precaution, avoid long-term contact with nickel-plated magnets and totally avoid contact with nickel-plated materials if you already have a nickel allergy.
How much or little it takes to trigger a nickel allergy is debatable and changes from person to person.
EFFECTS ON PEOPLE
Millions of people worldwide wear neodymium magnets to promote health and wellbeing.
We have found no evidence at all of the detrimental effects of neodymium magnets on people or animals C many people actually believe that magnets improve health and accelerate healing!
Rare Earth Neodymium Block Cube & Bar Magnets Magnets
N52 Rare Earth Magnets 1/2 inch Strong Neodymium Cube, 0.5, 0.5, 0.5, N52, NdFeB Magnets 1/4 in x 1/4 in x 1/2 inch
Rare Earth Neodymium Block Cube & Bar Magnets
ALB MAGNETS cube, block, and bar magnets are crafted from the highest quality rare earth neodymium.
These magnets are utilized across a wide spectrum of industries for a multitude of uses.
To ensure longevity and maximum protection from corrosion, these magnets come triple-coated with a base and top finish layer of nickel, with a layer of copper in-between.
Part of the content in this article is reproduced from other media for the purpose of transmitting more information and does not mean that this website agrees with its views or confirms the authenticity of its content. It shall not bear direct responsibility and joint liability for the infringement of such works. p>
If there is any infringement, bad information, error correction, and other issues in the content of this page, please contact us at email@example.com p>
Link to this article: https://www.albmagnets.com/blog/1-2-inch-cube-neodymium-magnets.html
How to choose and buy a strong neodymium magnet? ALBMagnets is a professional company for strong magnet design and manufacturing,
providing you with reliable N35, N38, N42, N52, N42SH and other grade super neodymium magnets and SmCo rare earth magnets.