1-Inch Diameter Round Neodymium Magnets

Neodymium Magnets 11/23/2020

1-inch diameter neodymium magnets

ALB neodymium cylinder magnets: 1" Diameter x 1" Thick. Wholesale/volume discounts available.

1 Inch Powerful Neodymium Rare Earth Large Cylinder Magnet N42 (1 Magnet) 61.00 lbs

1-inch Disc Cylinder Magnets

All Disc and Cylinder Shapes are listed here. For magnets with holes, click Ring Magnets.

1.25-inch Diameter x 0.25 inch Thick Neodymium Magnets

Neodymium magnets (also known as Neo, NdFeB, NIB, or super magnets), a type of rare earth magnets, are permanent magnets made from neodymium, iron, boron, and other rare earth materials.

Strong Neodymium Magnets Grade N42, stronger than N40, N38 and N35 Neodymium Magnets 1.25-inch Diameter x 0.25 inch Thick Rare Earth Disc Super Strong Magnet Nickel-Copper-Nickel triple layer coated for maximum neodymium magnets durability and protection again corrosion ISO Certified, top-notch quality and superior performance guaranteed Magnetized through the Thickness 0.25" Contact us for neodymium magnets wholesale discount.

BrMax: 14500 gauss Approximate pull force: 39 lbs

Neodymium Magnet Discs

Strong Neodymium disc & cylinder magnets are the most powerful rare-earth magnets with magnetic properties that far ... Diameter (inch).

$1000.00 total minimum order (excluding shipping & tax if applicable) -Items can be combined to reach the minimum amount.

Neodymium Disc Magnet Features & Characteristics

Neodymium Magnets Approximate Pull Information

These values are calculated under the assumption that the magnet will be attached to a flat, ground 1/2" thick mild steel plate.

Coatings, rust, rough surfaces, and certain environmental conditions can significantly reduce the pull force.

Please be sure to test the actual pull in your actual application.

For critical applications, it is suggested that the pull be de-rated by a factor of 2 or more, depending on the severity of a potential failure.

Manufacturing Methods for Neodymium Magnets

Our neodymium discs are sintered for optimal magnetic strength and axially magnetized (the magnetism direction is along the axis of the magnet from the north to the south poles).

Common finishing options include uncoated, nickel (Ni-Cu-Ni) and gold (Ni-Cu-Ni-Au) plated coatings.

Standard Measurement Tolerances for NdFeB Magnets

Standard tolerances are +/- 0.004” on both diameter and thickness dimensions.

Neodymium Disc Magnet Applications

​Neodymium disc magnets have remarkable holding power for their size, so they are ideal for all types of applications.

From craft & model making projects to high-performance motors, medical devices, audio components, science and research projects, trade shows, POP displays, and much more.

Custom Orders for Neodymium Disc Magnets

We can also custom manufacture neodymium disc magnets to your exact specifications, just send us a special request and we’ll work with you to determine the best solution for your specialty project.

ALB has over 10 years of expertise in manufacturing complex magnetic assemblies for more technical applications.

1 inch round magnets

A wide variety of 1 inch round magnets options are available to you, such as bending, cutting, and welding.

You can also choose from industrial magnet 1 inch round magnets, as well as from block, sheet, and pot/cup shape 1 inch round magnets, and whether 1 inch round magnets is neodymium magnet, NdFeB magnet, or rare earth magnet.

Round-Disc-Magnets-1-Inch

The ALB Ceramic Round Disc Magnets (500-Pack) is an industrial-grade disk magnet set that is designed to be used for classrooms, experiments, repair shop set-ups, whiteboard offices, and also as a fridge magnet at home.

Most, if not all magnetic products adhere rigidly to the surface to the point that it causes abrasion to the delicate surface.

However, the ALB Round Magnets are different.

They are precisely machined and beveled such that it resists sliding unnecessarily.

Its smooth surface also reduces overall friction, thus removing the chance of it scraping, damaging or chipping off the delicate surface where it is installed.

It is also strongly sintered, which means that it will resist shattering if you drop it accidentally.

Why Should You Have The ALB Grade 5 Strong Round Magnets?

● Retains maximum magnetic flux even on extreme temperatures -18° C to 175° C.

● Resists unnecessarily sliding that causes abrasion.

Will not damage chip off or scrape the delicate finish thanks to its smoothly machined surface.

● The highly pressurized sintering process makes the magnets resistant to breaking and shattering.

● Ages well and does not lose its magnetic flux even after years of installation.

● Beveled surface allows it to be easily picked up or repositioned when needed.

Why Choose the ALB brand?

We follow a set of strict laboratory and manufacturing standards which are accredited by ISO 9001.

Also, our customer service team will accommodate you any time of the day on your inquiries—even for products which have been purchased many months ago.

This is what a true worry-free purchase means.

Strong round magnets that resist shattering from drops.

Tough magnetic flux in yet easy to pick and pry for removal and re-positioning.

Evenly beveled edges and smoothly machined surfaces enable these ceramic magnets to not scratch or chip off the delicate finish of any surface where it is installed.

Pressurized Strontium and Iron Oxide construction empower these bulk classroom disc magnets to be resistant to corrosion, oxidation, rusting, and shattering.

Perfect outdoor button magnet.

Can withstand temperatures of up to 175° C and is a 2800 Gauss Grade 5 Rated strong round disk magnet.

These industrial rare earth magnets are ideal for repair shops, experiments, and heavy-duty applications.

Resists unnecessary sliding to surfaces and its dimple marker also shows the magnet’s the North Pole for easy application and handling.

Heat resistant surface allows these magnets to be hot glued or mounted with any adhesive.

Part of the content in this article is reproduced from other media for the purpose of transmitting more information and does not mean that this website agrees with its views or confirms the authenticity of its content. It shall not bear direct responsibility and joint liability for the infringement of such works.

If there is any infringement, bad information, error correction, and other issues in the content of this page, please contact us at info@albmaterials.com

Link to this article: https://www.albmagnets.com/blog/1-inch-diameter-round-neodymium-magnets.html