Salvage Magnets For Sale

Neodymium Magnets 04/01/2021

salvage magnets for sale

Buy 700Kg Salvage Strong Recovery Neodymium Magnet

Buy one of these magnets and get started today. Features and specifications: Material: NdFeB magnetic alloy; Pulling force: 700 kg; Colour: Silver; Height: 129 mm ...

Looking for a two-sided magnet with the power to fish metallic objects from the water or buried in the ground? This 700-kilogram-capacity neodymium magnet from ALB provides two-sided pulling power with 350-kilogram pulling forces on each side.

Perfect for family forays in search of buried treasure, this magnet will work whether you’re out fishing for treasure on the beach--or out in the bush.

Salvage useable metals, find coins, or locate lost jewelry all while enjoying the great outdoors with your loved ones.

Although these magnets are only 94 millimeters in diameter, they have incredible pulling power.

This power comes from the material inside-a magnetic alloy made from iron, nickel, and the rare-earth element neodymium.

It’s the strongest metallic magnet on Earth-and it can be yours.

Scientifically tested and proven, these magnets are so powerful that we advise buyers not to use them around magnetized objects such as credit cards, medical devices, or electronic devices.

With them, you and your family can embark on treasure hunts around your neighborhood or in your favorite holiday spot.

You can even put them to use around your house to locate wall studs when you need to hang a painting or wall clock.

Because studs are nailed to the wall, your magnet can locate the stud by locating the nails.

A practical, fun addition to your outdoor equipment, these magnets can turn every holiday into a treasure hunt.

For your next hobby, take up magnet fishing with your family.

Buy one of these magnets and get started today.

Features and specifications:

Salvage Neodymium Magnets from an Old Hard Drive

Learn how to locate and salvage super-strong rare-earth magnets from an old, broken hard drive.

Scavenging parts from old, discarded electronics is a skill every maker should hone.

Old hard drives in particular are stuffed with useful components and freebies that you can incorporate into other projects.

They’re also just plain fun to open up (at least once you find those hidden screws manufacturers hide under their labels to prevent tampering).

The folks at iFixit have a great teardown worth checking out that walks you through the process of opening a hard drive. The critical tool you’ll need is a set of Torx drivers orbits (typically T4, T6, and T8).

If there’s a pearl to be plucked from a hard drive, it’s the large, super-strong Neodymium (rare earth) magnet.

Manufacturers typically tuck these magnets under a permalloy bracket in the corner of the drive nearest the actuator arm that moves across the disc.

In the video shown here, you’ll see where to locate the magnet, how to remove the bracket, and how to use a vise and wrench to get a purchase on the strong magnet and remove it.

A standard 3.5” internal hard drive should yield two crescent-shaped magnets.

What can you make with the magnets when you’re done? Two projects that spring to mind are a magnetic knife rack or this magnetic tablet holster.

As shown in the video, the magnets also offer an easy way to collect stray nuts and bolts off your workbench.

How to Make a salvage magnet Attract Change

Attracting coins to a magnet can be an entertaining trick, especially for children learning about the properties of magnetism.

Most household magnets, such as those found on your refrigerator, are too weak to pick up the change.

To collect coins, you will need a rare-earth magnet.

Rare-earth magnets are very powerful and are often used in roller coasters and maglev trains.

If you have a few magnetic coins, collecting them with a rare-earth magnet takes only a second.

Obtain a rare-earth magnet, such as a neodymium magnet.

These magnets may be found in magic shops or teaching resource stores.

Collect magnetic coins that will react to the rare-earth magnet.

For a coin to be magnetic, it must contain some iron.

While current United States currency is not magnetic, coins from Canada, New Zealand, and Israel, among others, possess magnetic properties.

Hold the rare-earth magnet above the coins.

If the coins are magnetic, they are attracted to the magnet.

Due to its strength, the rare-earth magnet can pick up a chain of coins, with each coin attached to the other in a chain formation.

Things You'll Need

Magnetic coins

Warnings

Exercise caution when handling rare-earth magnets.

If two magnets are held close together, they can attract one another forcefully, causing injury to the person holding them.

Rare-earth magnets should be kept out of reach of small children

Excavator Magnet Scrap Magnet

Scrap and Steel Mill Magnets. Built for scrap yards, slab turning, mills, railway maintenance, and hot structural handling.

ALB Rectangular Scrap & Mill Magnets

ALB Rectangular Scrap Magnets provide optimum scrap charging capabilities, ideal for the loading and unloading.

The deep field & low inductance coils, decreases charging and discharging times allowing for increased performance.

Copper or Aluminum wound coils as standard design, available with HOT work bottom plates for severe mill applications or sliding pole shoes...

ALB Rectangular Scrap Magnets provide optimum scrap charging capabilities, ideal for the loading and unloading.

The deep field & low inductance coils, decreases charging and discharging times allowing for increased performance.

Copper or Aluminum wound coils as standard design, available with HOT work bottom plates for severe mill applications or sliding pole shoes for lifting round bars.

Magnet Features:

Heavy-duty cast or fabricated case, available in a variety of sizes • High Lifting Capability • Ideal for the loading and unloading of rail cars • Coil and Bar lifting • Scrap Charging • Lifting chains and connections included • Optional Spreader Beams • 230 Volts Standard;

Dual and special voltage

Applications:

Slab Turning, Hot Slab Handling, Hot Billet/Bloom Handling, Coil and Bar Handling, Hot Structural

*Also available: DC generating systems, controls, rectifiers, cable, and associated switchgear*

“Don’t waste/ruin your machine battery”

Up to 5 hours continuous run time, then simple 120-volt recharging. Separate charger supplied

2 x 12V batteries - 24 volts DC power

No Installation required

Warning Light on Top shows when the magnet is running

Pendant Remote Control operation for lift/drop - NO WIRING

“Don’t waste/ruin your machine battery”

Up to 5 hours continuous run time, then simple 120-volt recharging. Separate charger supplied

2 x 12V batteries - 24 volts DC power

No Installation required

Warning Light on Top shows when the magnet is running

Pendant Remote Control operation for lift/drop - NO WIRING

An automatic de-mag system ensures fast release of scrap from the magnet

The battery charger is provided in a separate box, feeding voltage 2x120 Vac 60 Hz.

Optional: Flux Density Control – for 0-100% voltage, ideal for dribbling or controlling the weight of the load

HEAVY duty construction in HARDOX material

Easily move between small machines

Model MRS100/B/24RC

- Dimensions: 42”Ø x 8.5”h (magnet only);

- Overall Dimensions: 42” Ø x 25.5”h;

- Weight: approx. 2300 lbs;

- Rated power at cold (20°C): 80 amps / 1.900W at 24 Vdc;

- Duty cycle (ED): 50-60% / 10 min;

- approx.Lifting capacity on slab: 13,000 lbs;

- approx.lifting capacity: 600 lbs;

The "Original" HYDRAULIC HMAG MAGNET

ALB builds the “Original” Hydraulic Magnet.

The HMAG is a combination scrap handling magnet with a power supply installed in a rugged case on the magnet.

A suitable hydraulic circuit, in terms of flow and pressure (and return line), is connected to the magnet.

Most often a bucket/hammer or auxiliary circuit is readily available on the boom or stick.

Breaking the...

ALB builds the “Original” Hydraulic Magnet.

The HMAG is a combination scrap handling magnet with a power supply installed in a rugged case on the magnet.

A suitable hydraulic circuit, in terms of flow and pressure (and return line), is connected to the magnet.

Most often a bucket/hammer or auxiliary circuit is readily available on the boom or stick.

Breaking the hydraulic flow through the valve begins an automatic drop circuit through electronic circuitry located within the enclosure.

No electric line goes to the magnet and there is no major installation required on the carrier.

System Features:

The HMAG can be quickly disconnected freeing up the machine for other duty – and/or moved to another machine.

A single system could then be quickly available for different users and sites within the company.

For companies with a fleet of machines, the hydraulic magnet offers a great deal of flexibility and efficiency.

Suits companies in the rental industry, demolition, and specialty contracting firms, transfer stations, railways, and ports who may have a limited requirement for a magnet will find this ideal for their operations.

Available sizes: 28″, 36″, 40″, 46″ & 52″ – Skid Loader magnet system also available c/w custom drop nose quick attach boom…

Part of the content in this article is reproduced from other media for the purpose of transmitting more information and does not mean that this website agrees with its views or confirms the authenticity of its content. It shall not bear direct responsibility and joint liability for the infringement of such works.

If there is any infringement, bad information, error correction, and other issues in the content of this page, please contact us at info@albmaterials.com

Link to this article: https://www.albmagnets.com/blog/salvage-magnets-for-sale.html