1/2 X 1/16 Inch Neodymium Magnets

Neodymium Magnets 02/19/2021

1/2 x 1/16 neodymium magnets

1/2 Disc Neodymium Magnets Supplies

Block 1/2" x 1/4" x 1/16" Neodymium Magnet. $0.56. In stock. Regular Stock. Buy 10 for $0.48 each and save 14%; Buy 100 for $0.40.

N35 Neodymium (NdFeB) Rare Earth Magnet Ni-Cu-Ni plating

- Permanent

- Are the strongest commercially available magnets

- Strength = N35

- Plating = Ni-Cu-Ni (nickel, copper, nickel)

We strongly advise you to read our Magnet FAQ ( under Customer Service at the bottom of the page) for safety facts and to help determine if a neodymium magnet is appropriate for your project.

It is the responsibility of the manufacturer to thoroughly test our products in their actual end-use application to determine their suitability.

1/2 inch x 1/4 inch x 1/16 inch neodymium block magnet

Buy 1/2 inch x 1/4 inch x 1/16 inch neodymium block magnet from www.albmagnets.com? Free USA shipping option on every order?

ALB Magnets Neodymium Rare Earth Magnet 1/16 x 1/2 Disc Magnets

Disc Cylinder Magnets

For magnets with holes, click Ring Magnets. Neodymium Magnets » Disc/Cylinder Magnets. 1/16" dia. x 1/2" thick. Nickel Plated Axially Magnetized.

Drilling-hole-in-magnets-sawing-magnets

Can I drill a hole in a magnet or saw them?

Since magnets are brittle and can break during drilling or sawing, we do not recommend such methods.

Find out below, what other complications can occur and which magnets are a suitable alternative.

Drilling or sawing of neodymium magnets is not recommended for the following reasons:

The material is brittle and fragile.

Drilling causes combustible dust.

The heat caused by the drill can possibly demagnetize the material.

Due to the missing coating at the borehole, magnets are no longer protected from corrosion.

Specialists can work with magnets with specialized diamond-tipped tools and constant water cooling.

However, this normally occurs prior to the magnetization of the material.

Alternative: Magnets with the hole

Luckily you can buy neodymium magnets with boreholes directly at our online shop.

Pot magnets with counterbore are also great for screw fastening.

Thanks to these two alternatives, you can leave it to the experts to drill holes in magnets.

Ferrite magnets

Drilling (or sawing) of ferrite magnets is not recommended.

The material is brittle and fragile.

Specialists can work with the magnets using specialized diamond-tipped tools, constant water cooling, and a high rotation speed.

However, this normally occurs before the magnetization of the material.

You can try to score and break ferrite magnets, but don't expect a clean break.

You don't need to drill yourself;

because we also carry screw-on ferrite pot magnets in our online shop.

Breaking edge of a scratched ferrite magnet

Additional information about magnets

If you would like to learn more about magnets and their characteristics, you can find useful information on these FAQ pages

Large Rare Earth Neodymium Magnets 1/2 Inch x 1/16 Inch

These strong large rare earth neodymium magnets are perfect for all of your bottle caps, photo tiles, crafting projects, and more.

Details

These extraordinarily strong magnets are first made from high-grade Neodymium material and then triple plated with nickel providing incredible strength, durability, and a beautiful shiny silver finish.

Perfect for all your crafting needs.

They work great when used with our other products to create refrigerator magnets and so much more.

You are limited only by your creativity.

These discs, like all of our magnets, are of the highest quality materials.

Neodymium magnets are the most permanent magnets available.

What this means is that these amazing little magnets will not lose any appreciable strength during your lifetime...regardless of your age! They are hands down, the strongest and most amazing magnets you can buy.

You may also be interested in the following product(s)

Magnets 1/2 x 1/16 -Neodymium Discs 1200pc

Price: Magnets 1/2 x 1/16 -Neodymium Discs 1200pc

Magnets are 1/2"x1/16"

The N35 grade magnets have a low profile and are unusually strong.

1/2" magnets are perfect for magnetic chokers, bracelets, and/or refrigerator magnets.

Countersunk Ring Magnet 1/2" x 1/8" · Neodymium Countersunk Ring Magnet 1/2" x 1/8".

The Neodymium (NdFeB) rare earth magnet is the strongest permanent magnet today and boasts an extremely high magnetic force and energy.

They are used in devices and instruments where a strong magnetic field is required, such as in avionics, spacecraft, electronic instruments and test equipment, medical instruments, microphones, DC motors, loudspeaker drivers, magnetic therapy products (you know the product..."Guaranteed to take 2~6 strokes off your game!")...the list goes on.

They're ideal for experimentation, science fair projects, alternative medical purposes, hanging up your kid's pictures on the fridge, but above all that, they're just plain fun to play with.

"Take two...they're small!"

Specifications: • Dimensions: 1/8" dia. x 1/16" thick • Magnetization Direction: Axial (Poles on Flat Ends) • Pull Force: 0.91 lbs.

• Surface Field: 2980 Gauss

Caution! Because of the high strength of Neodymium magnets, and to prevent injury to people or equipment, care must be taken when handling, e.g.

around other magnets, metal objects, electronic equipment, computer disks, watches, bank cards, etc.

Neodymium Disc Magnet 1/8" x 1/16" 10000-Pack

1/2 x 1/16 inch neodymium rare earth craft disc magnets N42 with 3m self-adhesive

4000pc-Rare-Earth-Magnets-Extra-Hold-Neodymium-Magnet

Manufacturers, suppliers, and others provide what you see here.

Rare Earth Magnets Are Not Your Typical Refrigerator Magnet, These are Super Strong and Long Lasting!

These discs are axially magnetized, so the strong North/South poles are in the center of the flat sides.

That makes them easier to stack into a cylinder than to connect side by side.

The metal coating is durable, but ALL Neodymium magnets can chip or shatter.

If used gently, these magnets can serve your entire life.

Diameter 3/8" Thickness: 5 mm Strength: 3 lbs

Made of Nickel Neodymium

Stronger and Last Longer than Average Magnets

Please Note: A 4000-Pack is one package

These top-quality Neodymium disc magnets are extremely strong and will last a lifetime.

They're coated with a Nickel alloy for long-lasting durability and a more polished look.

Plus they are up to 10 times stronger than all other ferrites, ceramic, or alnico magnets.

That makes them ideal for your do-it-yourself, arts & crafts, workshop, hobby, retail, scientific, educational, and manufacturing needs.

Package of 1600 magnets.

3/4 x 1/16 Inch Neodymium Rare Earth Disc Magnets N48 with 3M Self-Adhesive (1600 Pack).

These top-quality Neodymium disc magnets are extremely strong and will last a lifetime.

Specifications: Size: 0.75 x 0.0625 in (Diameter x Thickness).

Metric Size: 19.05 x 1.59 mm.

Grade: N48.

Pull Force: 5.66 lb.

Coating: Nickel-Copper-Nickel (Ni-Cu-Ni).

Magnetization: Axially.

Material: Neodymium (NdFeB).

Tolerance: +/- 0.004 in.

Max Operating Temperature: 176 F.

Surface Field: 1,167 Gauss.

Washers Included: Yes.

Quantity: 1600 Discs.

Part of the content in this article is reproduced from other media for the purpose of transmitting more information and does not mean that this website agrees with its views or confirms the authenticity of its content. It shall not bear direct responsibility and joint liability for the infringement of such works.

If there is any infringement, bad information, error correction, and other issues in the content of this page, please contact us at info@albmaterials.com

Link to this article: https://www.albmagnets.com/blog/1-2-x-1-16-inch-neodymium-magnets.html