2360 Corporate Circle. Suite 400
Henderson, NV 89074-7739
United States
E-mail: sales@albmagnets.com
- D-D30H5-N38 Neodymium Magnet, 30x5mm Disc Magnet
- R-OD40H25ID5-N45 Neodymium Magnet, OD40xID5x25mm Ring Magnet
- SWP-S Neodymium Magnets, 1/2 inch dia. x 0.075 inch thick, with 1 1/4 inch square plastic
- SB664-IN Neodymium Magnets, 3/8 inch length x 3/8 inch width x 1/4 inch thick, with step IN
- B10x10x3mm Neodymium Magnet, 10 x 10 x 3mm Block Magnet
- R-OD13H2ID5-N35 Neodymium Magnet, OD13xID5x2mm Ring Magnet
- B14x10x5mm Neodymium Magnet, 14 x 10 x 5mm Block Magnet
- D82-N52 Neodymium Magnets, 1/2 inch dia. x 1/8 inch thick
- B324 Neodymium Magnets, 3/16 inch x 1/8 inch x 1/4 inch thick
- D5x10mm Neodymium Magnet, 5 x 10mm Cylinder Magnet
- 4 Differences Between Neodymium Magnets And Samarium Cobalt Magnets
- Best Magnets For Gw Bases
- 10 Uses Of Magnets In The Home
- Can Steel Be Magnetized
- 1 Inch Cube Neodymium Magnets
- Cheap Magnets Bulk
- Where To Buy Rare Earth Neodymium Magnets?
- Buck Magnets Ball
- 5 Difference Between Bar Magnet And Electromagnet
- Brute Magnetics Double Sided
D60x10mm Neodymium Magnet, 60 x 10mm Disc Magnet
| Item No.: | ALB-D60x10mm |
|---|---|
| Material: | NdFeB, Grade N42 |
| Shape: | Disc |
| Dimension: | 60mm dia. x 10mm thick |
| Tolerances: | ±0.1mm x ±0.1mm |
| Weight: | 212.058g |
| Grade: | N42 |
| Coating: | Ni-Cu-Ni (Nickel) |
| Pull Force(lbs): | 83.27 lbs (37.85kg) |
| Surface Field(Gauss): | 2087 Gauss |
| Magnetization direction: | Axial (Poles on Flat Ends) |
| Max Operating Temp: | 80°C |
| Product Drawing: |  ·  |
Previous: D60x5mm Neodymium Magnet, 60 x 5mm Disc Magnet
Next: D60x20mm Neodymium Magnet, 60 x 20mm Disc Magnet
Related Magnets
D60x25mm Neodymium Magnet, 60 x 25mm Disc Magnet
D60x30mm Neodymium Magnet, 60 x 30mm Disc Magnet
D66x8mm Neodymium Magnet, 66 x 8mm Disc Magnet
D70x40mm Neodymium Magnet, 70 x 40mm Disc MagnetOther Grade D60x10mm Neodymium Magnets (60mm dia. x 10mm thick):
| Grade | Item No. | Product Name | Pull Force | Inquiry |
|---|---|---|---|---|
| N35 | ALB-D60x10mm-N35 | D60x10mm-N35 Neodymium Magnets | 69.97 lbs (31.80kg) | Inquiry |
| N38 | ALB-D60x10mm-N38 | D60x10mm-N38 Neodymium Magnets | 69.97 lbs (31.80kg) | Inquiry |
| N40 | ALB-D60x10mm-N40 | D60x10mm-N40 Neodymium Magnets | 75.87 lbs (34.49kg) | Inquiry |
| N42 | ALB-D60x10mm | D60x10mm Neodymium Magnets | 83.27 lbs (37.85kg) | Inquiry |
| N45 | ALB-D60x10mm-N45 | D60x10mm-N45 Neodymium Magnets | 88.39 lbs (40.18kg) | Inquiry |
| N48 | ALB-D60x10mm-N48 | D60x10mm-N48 Neodymium Magnets | 93.67 lbs (42.58kg) | Inquiry |
| N50 | ALB-D60x10mm-N50 | D60x10mm-N50 Neodymium Magnets | 96.37 lbs (43.80kg) | Inquiry |
| N52 | ALB-D60x10mm-N52 | D60x10mm-N52 Neodymium Magnets | 99.10 lbs (45.05kg) | Inquiry |
| N42SH | ALB-D60x10mmSH | D60x10mmSH Neodymium Magnets | 83.27 lbs (37.85kg) | Inquiry |
High Temperature D60x10mm Neodymium Magnets (60mm dia. x 10mm thick) are also available:
| Neodymium Material Type | Maximum Operating Temp | Curie Temp |
|---|---|---|
| N (N35-N52) | 176°F (80°C) | 590°F (310°C) |
| NM (N35M-N52M) | 212°F (100°C) | 644°F (340°C) |
| NH (N33H-N52H) | 248°F (120°C) | 644°F (340°C) |
| NSH (N30SH-N50SH) | 302°F (150°C) | 644°F (340°C) |
| NUH (N28UH-N48UH) | 356°F (180°C) | 662°F (350°C) |
| NEH (N28EH-N48EH) | 392°F (200°C) | 662°F (350°C) |
| NAH (N28AH-N35AH) | 428°F (220°C) | 662°F (350°C) |
The Thermal Characteristics listed above are values commonly associated with each magnet's grade or material. Actual performance in your application may vary with other factors, including the shape of the magnet, the Permeance Coefficient or load line, and how it is used in a circuit.
D60x10mm Neodymium Magnets (60mm dia. x 10mm thick) with other Coating are also available:
| Coating Type | Overall Thickness | Salt Spray Test | Pressure Cooker Test |
|---|---|---|---|
| Ni-Cu-Ni (Nickel) | 15-21 μm | 24 hours | 48 hours |
| NiCu + Black Nickel | 15-21 μm | 24 hours | 48 hours |
| NiCuNi + Epoxy | 20-28 μm | 48 hours | 72 hours |
| NiCuNi + Gold | 16-23 μm | 36 hours | 72 hours |
| NiCuNi + Silver | 16-23 μm | 24 hours | 48 hours |
| Zinc | 7-15 μm | 12 hours | 24 hours |
Each individual layer of Nickel and Copper are 5-7 μm thick. The Gold and Silver Coating layers are 1-2 μm thick. Test results shown to allow comparison between Coating options. Performance in your application under your specific test conditions may vary. Salt Spray testing conducted with a 5% NaCl solution, at 35°C. Pressure Cooker Test (PCT) conducted at 2 atm, 120°C at 100% RH.
If you can't find what you want, just send us an inquiry and we will be happy to make it for you!
Send us an inquiry now to find out more information and the latest prices, thanks!
Company
About Us
Privacy Policy
Terms & Conditions
XML Sitemap
HTML SitemapCustomer Support
Inquiry
FAQ
How To Order
Shipment TrackingFeatured Magnets
Neodymium Magnets
Micro Magnets
Custom MagnetsPopular Magnets
Grade N42 Magnets
Grade N52 Magnets
Magnets Pull Force Calculator
Contact Us
ALB Materials Inc
2360 Corporate Circle. Suite 400
Henderson, NV 89074-7739
Website: www.albmagnets.com
E-mail: sales@albmagnets.com
How to choose and buy a strong neodymium magnet? ALBMagnets is a professional company for strong magnet design and manufacturing,
providing you with reliable N35, N38, N42, N52, N42SH and other grade super neodymium magnets and SmCo rare earth magnets.