2360 Corporate Circle. Suite 400
Henderson, NV 89074-7739
United States
E-mail: sales@albmaterials.com
- B888-2PE-N52 Neodymium Magnets, 1/2 inch x 1/2 inchx 1/2 inch (- 0.127 inch hole) Hole perpendicular to magnetization direction
- D69 Neodymium Magnets, 3/8 inch dia. x 9/16 inch thick
- C-D50.8H50.8-N50 Neodymium Magnet, 50.8x50.8mm Cylinder Magnet
- D74 Neodymium Magnets, 7/16 inch dia. x 1/4 inch thick
- B621 Neodymium Magnets, 3/8 inch x 1/8 inch x 1/16 inch thick
- BY0X02-N52 Neodymium Magnets, 2 inch x 1 inch x 1/8 inch thick
- B50x50x5mm Neodymium Magnet, 50 x 50 x 5mm Block Magnet
- DX87 Neodymium Magnets, 1 1/2 inch dia. x 7/16 inch thick
- R422CS-P Neodymium Magnets, 1/4 inch od x 1/8 inch thick with countersunk hole for #2 screw
- RX038DCB-N52 Neodymium Magnets, 1 inch od x 0.195 inch id x 0.375 inch id x 1/2 inch thick
- Where Can I Buy Large Magnets?
- Neodymium Disc Magnets Table
- Neodymium Cylinder Magnets Table
- 4 Differences Between Neodymium Magnets And Samarium Cobalt Magnets
- 10 Examples Of Magnetic Materials
- Neodymium Block & Bar Magnets Table
- 81mm Round Magnet
- Rare Earth Neodymium Magnets Manufacturer
- 1/4 x 1/8 Magnets
- 1000 Lb Fishing Magnet
B30x5x2mm Neodymium Magnet, 30 x 5 x 2mm Block Magnet
| Item No.: | ALB-B30x5x2mm |
|---|---|
| Material: | NdFeB, Grade N42 |
| Shape: | Block |
| Dimension: | 30x5x2mm |
| Tolerances: | ±0.1mm x ±0.1mm x ±0.1mm |
| Weight: | 2.250g |
| Grade: | N42 |
| Coating: | Ni-Cu-Ni (Nickel) |
| Pull Force(lbs): | 3.84 lbs (1.74kg) |
| Surface Field(Gauss): | 2879 |
| Magnetization direction: | Through Thickness |
| Max Operating Temp: | 80°C |
| Product Drawing: |  ·  |
Previous: B30x5x1mm Neodymium Magnet, 30 x 5 x 1mm Block Magnet
Next: B30x5x3mm Neodymium Magnet, 30 x 5 x 3mm Block Magnet
Related Magnets
B30x5x5mm Neodymium Magnet, 30 x 5 x 5mm Block Magnet
B30x6x2mm Neodymium Magnet, 30 x 6 x 2mm Block Magnet
B30x10x1mm Neodymium Magnet, 30 x 10 x 1mm Block Magnet
B30x10x2mm Neodymium Magnet, 30 x 10 x 2mm Block MagnetOther Grade B30x5x2mm Neodymium Magnets (30x5x2mm):
| Grade | Item No. | Product Name | Pull Force | Inquiry |
|---|---|---|---|---|
| N35 | ALB-B30x5x2mm-N35 | B30x5x2mm-N35 Neodymium Magnets | 3.22 lbs (1.47kg) | Inquiry |
| N38 | ALB-B30x5x2mm-N38 | B30x5x2mm-N38 Neodymium Magnets | 3.22 lbs (1.47kg) | Inquiry |
| N40 | ALB-B30x5x2mm-N40 | B30x5x2mm-N40 Neodymium Magnets | 3.50 lbs (1.59kg) | Inquiry |
| N42 | ALB-B30x5x2mm | B30x5x2mm Neodymium Magnets | 3.84 lbs (1.74kg) | Inquiry |
| N45 | ALB-B30x5x2mm-N45 | B30x5x2mm-N45 Neodymium Magnets | 4.07 lbs (1.85kg) | Inquiry |
| N48 | ALB-B30x5x2mm-N48 | B30x5x2mm-N48 Neodymium Magnets | 4.32 lbs (1.96kg) | Inquiry |
| N50 | ALB-B30x5x2mm-N50 | B30x5x2mm-N50 Neodymium Magnets | 4.44 lbs (2.02kg) | Inquiry |
| N52 | ALB-B30x5x2mm-N52 | B30x5x2mm-N52 Neodymium Magnets | 4.57 lbs (2.08kg) | Inquiry |
| N42SH | ALB-B30x5x2mmSH | B30x5x2mmSH Neodymium Magnets | 3.84 lbs (1.74kg) | Inquiry |
High Temperature B30x5x2mm Neodymium Magnets (30x5x2mm) are also available:
| Neodymium Material Type | Maximum Operating Temp | Curie Temp |
|---|---|---|
| N (N35-N52) | 176°F (80°C) | 590°F (310°C) |
| NM (N35M-N52M) | 212°F (100°C) | 644°F (340°C) |
| NH (N33H-N52H) | 248°F (120°C) | 644°F (340°C) |
| NSH (N30SH-N50SH) | 302°F (150°C) | 644°F (340°C) |
| NUH (N28UH-N48UH) | 356°F (180°C) | 662°F (350°C) |
| NEH (N28EH-N48EH) | 392°F (200°C) | 662°F (350°C) |
| NAH (N28AH-N35AH) | 428°F (220°C) | 662°F (350°C) |
The Thermal Characteristics listed above are values commonly associated with each magnet's grade or material. Actual performance in your application may vary with other factors, including the shape of the magnet, the Permeance Coefficient or load line, and how it is used in a circuit.
B30x5x2mm Neodymium Magnets (30x5x2mm) with other Coating are also available:
| Coating Type | Overall Thickness | Salt Spray Test | Pressure Cooker Test |
|---|---|---|---|
| Ni-Cu-Ni (Nickel) | 15-21 μm | 24 hours | 48 hours |
| NiCu + Black Nickel | 15-21 μm | 24 hours | 48 hours |
| NiCuNi + Epoxy | 20-28 μm | 48 hours | 72 hours |
| NiCuNi + Gold | 16-23 μm | 36 hours | 72 hours |
| NiCuNi + Silver | 16-23 μm | 24 hours | 48 hours |
| Zinc | 7-15 μm | 12 hours | 24 hours |
Each individual layer of Nickel and Copper are 5-7 μm thick. The Gold and Silver Coating layers are 1-2 μm thick. Test results shown to allow comparison between Coating options. Performance in your application under your specific test conditions may vary. Salt Spray testing conducted with a 5% NaCl solution, at 35°C. Pressure Cooker Test (PCT) conducted at 2 atm, 120°C at 100% RH.
If you can't find what you want, just send us an inquiry and we will be happy to make it for you!
Send us an inquiry now to find out more information and the latest prices, thanks!
Company
About Us
Privacy Policy
Terms & Conditions
XML Sitemap
HTML SitemapCustomer Support
Inquiry
FAQ
How To Order
Shipment TrackingFeatured Magnets
Neodymium Magnets
Micro Magnets
Custom MagnetsPopular Magnets
Grade N42 Magnets
Grade N52 Magnets
Magnets Pull Force Calculator
Contact Us
ALB Materials Inc
Website: www.albmagnets.com
E-mail: sales@albmaterials.com
How to choose and buy a strong neodymium magnet? ALBMagnets is a professional company for strong magnet design and manufacturing,
providing you with reliable N35, N38, N42, N52, N42SH and other grade super neodymium magnets and SmCo rare earth magnets.