15mm dia x 0.5mm thick Disc Magnets | F290NASA
F290NASA Neodymium Disc Magnets is made of Grade N42 NdFeB, nickel plated. The dimension is 15mm dia x 0.5mm thick, axial magnetized. Pull force is approximately 0.28kg. Incredibly thin, high-performance Neodymium (N42) self-adhesive disc magnet, available with either pole on the non-adhesive side.
These high-performance neodymium magnets are available with either pole on the non-adhesive face. Due to the incredible size to strength ratio of neodymium, we recommend allowing between 24 to 32 hours for the adhesive to cure.
- 15mm diameter x 0.5mm thick.
- +/-0.1mm tolerance.
- Each magnet's north pole is on the non-adhesive face and the south pole is on the self-adhesive face.
- Convenient super-strong 3M™ 468 adhesive with easy-peel backing.
- Each magnet can support a steel weight of up to 0.28kg vertically from the magnetic face when in flush contact with a mild steel surface.
- Excellent resistance to demagnetisation.
- Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish.
F290NASA
Data sheet
- Item No.
- ALB-F290NASA
- Material
- NdFeB
- Grade
- N42
- Size
- 15mm dia x 0.5mm thick
- Tolerance
- ±0.004"(±0.1mm)
- Coating
- Nickel Plated
- Magnetization Direction
- Axial
- Weight
- 0.663g
- Pull Force
- 0.28kg
- Diameter
- E. 12.7-19.05mm
- Thickness
- A. 0.00-3.18mm
8 other products in the same category:
F290NASA Neodymium Disc Magnets is made of Grade N42 NdFeB, nickel plated. The dimension is 15mm dia x 0.5mm thick, axial magnetized. Pull force is approximately 0.28kg. Incredibly thin, high-performance Neodymium (N42) self-adhesive disc magnet, available with either pole on the non-adhesive side.
These high-performance neodymium magnets are available with either pole on the non-adhesive face. Due to the incredible size to strength ratio of neodymium, we recommend allowing between 24 to 32 hours for the adhesive to cure.