10 x 3 x 2mm Block Magnets | F10x3x2mm-N45H
F10x3x2mm-N45H Neodymium Block Magnets is made of Grade N45H NdFeB, nickel plated. The dimension is 10 x 3 x 2mm, thru thickness magnetized. Pull force is approximately 0.8kg. Small, thin, rectangle high-performance Neodymium (N45H) magnets. These magnets have a higher maximum operating temperature than regular grade Neodymium magnets.
- 10mm x 3mm x 2mm thick.
- +/-0.1mm tolerance.
- Each magnet's north and south pole are on opposite 10mm x 3mm faces.
- Each magnet can support a steel weight of up to 0.8kg vertically from the magnetic face when in flush contact with a mild steel surface.
- Can operate in temperatures up to 120 degrees Celsius.
- Excellent resistance to demagnetisation.
- Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish.
F10x3x2mm-N45H
Data sheet
- Item No.
- F10x3x2mm-N45H
- Material
- NdFeB
- Grade
- N45H
- Size
- 10 x 3 x 2mm
- Tolerance
- ±0.004"(±0.1mm)
- Coating
- Nickel Plated
- Magnetization Direction
- Thru Thickness
- Weight
- 0.450g
- Length
- D. 9.53-12.7mm
- Thickness
- A. 0.00-3.18mm
- Width
- A. 0.00-3.18mm
F10x3x2mm-N45H Neodymium Block Magnets is made of Grade N45H NdFeB, nickel plated. The dimension is 10 x 3 x 2mm, thru thickness magnetized. Pull force is approximately 0.8kg. Small, thin, rectangle high-performance Neodymium (N45H) magnets. These magnets have a higher maximum operating temperature than regular grade Neodymium magnets.