5 x 5 x 1mm Block Magnets | F5x5x1mm-N45H
F5x5x1mm-N45H Neodymium Block Magnets is made of Grade N45H NdFeB, nickel plated. The dimension is 5 x 5 x 1mm, thru thickness magnetized. Pull force is approximately 0.4kg. Small, thin, square high-performance Neodymium (N45H) magnets. These magnets have a higher maximum operating temperature than regular grade Neodymium magnets.
- 5mm x 5mm x 1mm.
- +/-0.1mm tolerance.
- Each magnet's north and south pole are on opposite 5mm x 5mm faces.
- Each magnet can support a steel weight of up to 0.4kg vertically from the magnetic face when in flush contact with a mild steel surface.
- Can operate in temperatures up to 120 degrees Celsius.
- Excellent resistance to demagnetisation.
- Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish.
F5x5x1mm-N45H
Data sheet
- Item Number
- F5x5x1mm-N45H
- Material
- NdFeB
- Grade
- N45H
- Size
- 5 x 5 x 1mm
- Tolerance
- ±0.004"(±0.1mm)
- Coating
- Nickel Plated
- Magnetization Direction
- Thru Thickness
- Weight
- 0.188g
- Pull Force
- 0.4kg
- Length
- B. (3.18-6.35]mm
- Thickness
- A. (0.00-3.18]mm
- Width
- B. (3.18-6.35]mm
F5x5x1mm-N45H Neodymium Block Magnets is made of Grade N45H NdFeB, nickel plated. The dimension is 5 x 5 x 1mm, thru thickness magnetized. Pull force is approximately 0.4kg. Small, thin, square high-performance Neodymium (N45H) magnets. These magnets have a higher maximum operating temperature than regular grade Neodymium magnets.